burncd error

Joe Talbott josepht at cstone.net
Wed Jun 13 14:52:24 PDT 2007


I get the following error when I try to burn a CD with burncd:

next writeable LBA 0
writing from file /home/josepht/tar-files/Minix-IDE-3.1.2a.iso size
417792 KB

only wrote -1 of 32768 bytes err=30

I believe this is EROFS.  Here's the relevant dmesg lines:

atapci0: <Intel ICH7M SATA controller> port
0x18b0-0x18bf,0-0x3,0-0x7,0-0x3,0-0x
7 irq 18 at device 31.2 on pci0

ata1: at 0x170 irq 15 on atapci0
acd0: DVD-R <PIONEER DVD-RW DVR-K16A> at ata1-master UDMA33
cd0 at ata1 bus 0 target 0 lun 0
cd0: <PIONEER DVD-RW  DVR-K16A 1.63> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: cd present [224926 x 2048 byte records]

I also see these lines in dmesg:

acd0: READ_TRACK_INFO - ILLEGAL REQUEST asc=0x24 ascq=0x00 error=0x00
acd0: READ_TRACK_INFO - ILLEGAL REQUEST asc=0x24 ascq=0x00 error=0x00
acd0: READ_TRACK_INFO - ILLEGAL REQUEST asc=0x24 ascq=0x00 error=0x00
acd0: READ_BIG - BLANK CHECK asc=0x00 ascq=0x00 error=0x00
acd0: READ_BIG - BLANK CHECK asc=0x00 ascq=0x00 error=0x00

Here's my uname output:

DragonFly hostname 1.9.0-DEVELOPMENT DragonFly
1.9.0-DEVELOPMENT #163: Sat Jun  9 09:56:45 EDT 2007
root at hostname:/home/obj/usr/src/sys/NEPTUNE  i386

Note: I'm still not running a NATA kernel.  I seem to remember reading
somewhere that CD-ROM drives on SATA controllers were not supported so
this may be what I'm running into.

Thanks,
Joe





More information about the Bugs mailing list