[issue557] 1.9.0-DEVELOPMENT hangs with ACPI enabled

Mariano Aliaga marianoaliaga at gmail.com
Wed Feb 14 03:51:07 PST 2007


Hi,

On 2/13/07, YONETANI Tomokazu <bugs at lists.dragonflybsd.org> wrote:
"hang" means that neither ctrl+alt+esc nor ctrl+alt+del works?

Yes, neither ctrl+alt+esc nor ctrl+alt+del works.

Does any of the following command in the boot loader make the boot
proceed any further?
set debug.acpi.disabled="ec"
set debug.acpi.disabled="cmbat"
set debug.acpi.disabled="acad"
                :
Yes, I've tried them all. Whith 3 of them the system boots OK: bus,
children and cpu.
BTW, what was the manufacturer and the model of your mainboard/PC/laptop?

My PC's mainboard is ASUS P4V8X-X. I attach dmesg with
debug.acpi.disabled="cpu" for more info.
----------
status: unread -> chatting
_____________________________________________________
DragonFly issue tracker <bugs at lists.dragonflybsd.org>
<http://bugs.dragonflybsd.org/issue557>
_____________________________________________________
--
"El incremento de la satisfacción profesional y de la unidad familiar
son fatales para un proveedor de sustancias entumecedoras del cerebro."
Moe, 1991.
Copyright (c) 2003, 2004, 2005, 2006, 2007 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly 1.9.0-DEVELOPMENT #0: Tue Feb 13 15:47:55 ART 2007
    root at dragonix.enix.net.ar:/usr/obj/usr/src/sys/GENERIC
TSC clock: 2400031278 Hz, i8254 clock: 1193236 Hz
CPU: Intel(R) Celeron(R) CPU 2.40GHz (2399.94-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf33  Stepping = 3
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x41d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID>
real memory  = 1609760768 (1572032K bytes)
avail memory = 1552556032 (1516168K bytes)
Preloaded elf kernel "/kernel" at 0xc0776000.
Preloaded elf module "/modules/acpi.ko" at 0xc0776210.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 10 entries at 0xc00f5a40
ACPI: RSDP @ 0x0xfa3a0/0x0014 (v  0 ACPIAM)
ACPI: RSDT @ 0x0x5ff30000/0x0030 (v  1 A M I  OEMRSDT  0x08000412 MSFT 0x00000097)
ACPI: FACP @ 0x0x5ff30200/0x0081 (v  2 A M I  OEMFACP  0x08000412 MSFT 0x00000097)
ACPI: DSDT @ 0x0x5ff303f0/0x3586 (v  1  A0017 A0017001 0x00000001 INTL 0x02002026)
ACPI: FACS @ 0x0x5ff40000/0x0040
ACPI: APIC @ 0x0x5ff30390/0x0052 (v  1 A M I  OEMAPIC  0x08000412 MSFT 0x00000097)
ACPI: OEMB @ 0x0x5ff40040/0x0040 (v  1 A M I  AMI_OEM  0x08000412 MSFT 0x00000097)
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
can't fetch resources for \\_PR_.CPU1 - AE_TYPE
can't fetch resources for \\_PR_.CPU2 - AE_TYPE
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
legacypci0 on motherboard
pcib0: <Host to PCI bridge> on legacypci0
pci0: <PCI bus> on pcib0
agp0: <VIA Generic host to PCI bridge> mem 0xe0000000-0xefffffff at device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=1106 device=b198)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia model 0185 graphics accelerator> at 0.0 irq 11
atapci0: <VIA 8237 SATA 150 controller> port 0xe800-0xe8ff,0xef90-0xef9f,0xefa8-0xefab,0xefa0-0xefa7,0xefac-0xefaf,0xefe0-0xefe7 irq 10 at device 15.0 on pci0
ata2: at 0xefe0 on atapci0
ata3: at 0xefa0 on atapci0
atapci1: <VIA 8237 ATA133 controller> port 0xfc00-0xfc0f at device 15.1 on pci0
ata0: at 0x1f0 irq 14 on atapci1
ata1: at 0x170 irq 15 on atapci1
uhci0: <VIA 83C572 USB controller> port 0xeec0-0xeedf irq 11 at device 16.0 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xef00-0xef1f irq 11 at device 16.1 on pci0
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xef20-0xef3f irq 10 at device 16.2 on pci0
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xef40-0xef5f irq 10 at device 16.3 on pci0
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: 2 ports with 2 removable, self powered
pci0: <USB controller> at 16.4 irq 5
isab0: <PCI to ISA bridge (vendor=1106 device=3227)> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pci0: <unknown card> (vendor=0x1106, dev=0x3059) at 17.5 irq 5
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe400-0xe4ff mem 0xdff00000-0xdff000ff irq 11 at device 18.0 on pci0
miibus0: <MII bus> on vr0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: MAC address: 00:0e:a6:be:a8:69
orm0: <Option ROMs> at iomem 0xc0000-0xcf7ff,0xcf800-0xd37ff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: can't drain, serial port might not exist, disabling
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad4: DMA limited to UDMA33, non-ATA66 cable or device
ad4: 114473MB <WDC WD1200JD-00HBB0> [232581/16/63] at ata2-master UDMA33
acd0: DVD-R <SONY DVD RW DW-D22A> at ata0-slave PIO4
Mounting root from ufs:/dev/ad4s1a
cd0 at ata0 bus 0 target 1 lun 0
cd0: <SONY DVD RW DW-D22A BYS2> Removable CD-ROM SCSI-0 device 
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present




More information about the Bugs mailing list