Fwd: Re: buildworld panics with yesterday's kernel ...
Andrew Atrens
atrens at nortelnetworks.com
Wed May 5 13:36:33 PDT 2004
Matthew Dillon wrote:
> :All but the nvidia module ... I just recompiled it and tried again
> :(kern.mmxopt=0) and I get the same thing. In fact if I boot with
> :_just_ the kernel loaded I get the same thing ....
>
> Send me your kernel config. I'll compile up a kernel for you and have
> you download and try to boot it. Maybe something got corrupted on
> your system (judging by the fs corruption already reported, it's quite
> possible).
It is I suppose. Sounds worth a try :) ...
>
> Also, if you can get a DDB prompt (options DDB) and a backtrace
I tried, no luck. :( It's on the serial console, but it dies too fast to
break. :(
> ('trace' from the ddb prompt) that would be helpful.
>
> -Matt
Here's my config -
machine i386
cpu I686_CPU
ident ATRENS
maxusers 0
makeoptions DEBUG=-gstabs
options GDB_REMOTE_CHAT
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options IPSEC #IP security
options IPSEC_ESP #IP security (crypto; define w/
IPSEC)
options IPSEC_DEBUG #debug for IP security
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep
this!]
options SOFTUPDATES #Enable FFS soft updates support
options UFS_DIRHASH
options MFS #Memory Filesystem
options MD_ROOT #MD is a potential root device
options NFS #Network Filesystem
options NFS_ROOT #NFS usable as root device, NFS
required
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root, CD9660
required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP
THIS!]
options COMPAT_LINUX #Compatible with BSD 4.3 [KEEP
THIS!]
options DEBUG_LINUX #Compatible with BSD 4.3 [KEEP
THIS!]
options UCONSOLE #Allow users to grab the console
options UDF
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options PQ_CACHESIZE=512
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options _KPOSIX_VERSION=199309L
options NETGRAPH
options ICMP_BANDLIM #Rate limit bad replies
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options CPU_ATHLON_SSE_HACK
options PCI_ENABLE_IO_MODES
device isa
device pci
#device agp
device scbus
device pass
device da
device cd
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
# ATA and ATAPI devices
device twe
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapicam
options ATA_STATIC_ID #Static device numbering
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12
device vga0 at isa?
device pcm
# splash screen/screen saver
options SC_PIXEL_MODE
pseudo-device splash
device sc0 at isa? flags 0x100
device npx0 at nexus? port IO_NPX irq 13
device acpica
device sio0 at isa? port IO_COM1 flags 0xb0 irq 4
#
# `flags' for serial drivers that support consoles (only for sio now):
# 0x10 enable console support for this unit. The other console flags
# are ignored unless this is set. Enabling console support does
# not make the unit the preferred console - boot with -h or set
# the 0x20 flag for that. Currently, at most one unit can have
# console support; the first one (in config file order) with
# this flag set is preferred. Setting this flag for sio0 gives
# the old behaviour.
# 0x20 force this unit to be the console (unless there is another
# higher priority console). This replaces the COMCONSOLE option.
# 0x40 reserve this unit for low level console operations. Do not
# access the device in any normal way.
# 0x80 use this port for serial line gdb support in ddb.
#
# Options for serial drivers that support consoles (only for sio now):
options BREAK_TO_DEBUGGER #a BREAK on a comconsole goes to
options CONSPEED=9600 # speed for serial console
options PPC_PROBE_CHIPSET
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
device ppi
device miibus # MII bus support
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device sl 1 # Kernel SLIP
pseudo-device ppp 1 # Kernel PPP
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device snp
pseudo-device md # Memory "disks"
pseudo-device gif # IPv6 and IPv4 tunneling
pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf #Berkeley packet filter
options INCLUDE_CONFIG_FILE # Include this file in kernel
options DDB
options DDB_UNATTENDED
options KTRACE
options NETSMB #SMB/CIFS requester
options NETSMBCRYPTO #encrypted password support for SMB
options LIBMCHAIN #mbuf management library
options IPFIREWALL #firewall
options IPFIREWALL_VERBOSE #print information about
options IPFIREWALL_FORWARD #enable transparent proxy support
options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity
options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default
options IPV6FIREWALL #firewall for IPv6
options IPV6FIREWALL_VERBOSE
options IPV6FIREWALL_VERBOSE_LIMIT=100
options IPV6FIREWALL_DEFAULT_TO_ACCEPT
options IPDIVERT #divert sockets
options IPSTEALTH #support for stealth forwarding
options RANDOM_IP_ID
options ICMP_BANDLIM
options SMBFS #SMB/CIFS filesystem
options LIBICONV
options VESA
device ehci
device uhci
device ohci
device usb
device ugen
device uhid
device ukbd
device umass
device ums
device urio
options USB_DEBUG
device firewire # Firewire bus code
device sbp # SCSI over Firewire (Requires scbus and da)
device fwe # Ethernet over Firewire (non-standard!)
options INVARIANTS
options INVARIANT_SUPPORT
More information about the Bugs
mailing list