XFree86 Lock up

James Frazer jfrazer at ieee.org
Fri May 7 19:57:55 PDT 2004


Well, I suppose dmesg.today is nearly the same (forgot which when I had 
to reboot).

Copyright (c) 2003-2004 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly 1.0-CURRENT #0: Sun Mar  7 16:33:16 CST 2004
    root at xxxxxxxxxxx:/usr/obj/usr/src/sys/GENERIC
CPU: Pentium II/Pentium II Xeon/Celeron (448.05-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x652  Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 134205440 (131060K bytes)
avail memory = 121737216 (118884K bytes)
Preloaded elf kernel "/kernel" at 0xc05a9000.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00f1c50
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on 
motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 
0xec000000-0xefffffff at device 0.0 on pci0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <S3 Trio3D graphics accelerator> at 1.0 irq 9
isab0: <Intel 82371AB PCI to ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfff0-0xffff at device 2.1 
on pci0
ata0: at 0x1f0 irq 14 on atapci0
installed MI handler for int 14
ata1: at 0x170 irq 15 on atapci0
installed MI handler for int 15
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xff00-0xff1f irq 
11 at device 2.2 on pci0
installed MI handler for int 11
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <Intel 82371AB Power management controller> at 2.3
fxp0: <Intel 82558 Pro/100 Ethernet> port 0x7c20-0x7c3f mem 
0xf3f00000-0xf3ffffff,0xf3eff000-0xf3efffff irq 11 at device 3.0 on pci0
fxp0: Ethernet address 00:04:ac:b9:77:1a
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <unknown card> (vendor=0x1274, dev=0x5880) at 20.0 irq 10
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
installed MI handler for int 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
installed MI handler for int 1
psm0: <PS/2 Mouse> irq 12 on atkbdc0
installed MI handler for int 12
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
installed MI handler for int 4
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
installed MI handler for int 3
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
installed MI handler for int 7
installed MI handler for int 0
ad0: 58623MB <Maxtor 96147H8> [119108/16/63] at ata0-master UDMA33
acd0: DVD-ROM <Pioneer DVD-ROM ATAPIModel DVD-106S 0122> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <PIONEER DVD-ROM DVD-106 1.22> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
pcm0: <Creative CT5880-C> port 0x7c40-0x7c7f irq 10 at device 20.0 on pci0
pcm0: <SigmaTel STAC9708/11 AC97 Codec>
installed MI handler for int 10





Matthew Dillon wrote:
:"DragonFly"
:
:James
    How about posting your /var/run/dmesg.boot, that should be more helpful.

				-Matt






More information about the Bugs mailing list