-current of today boot still hangs on P-4 w/ HTT

Kim Culhan w8hdkim at yahoo.com
Wed Jul 28 08:26:04 PDT 2004


DragonFly current of ~1500 utc  7-28-04

enabling smp in the kernel is causing this hang on a
P-4 with HTT:

ppi0: <Parallel I/O> on ppbus0
installed MI handler for int 7
installed MI handler for int 0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: Broken MP table detected: 8254 is not connected to IOAPIC #0
intpin 2
APIC_IO: routing 8254 via 8259 and IOAPIC #0 intpin 0
SMP: AP CPU #1 Launched!
acd0: CDROM <CD-224E> at ata1-master PIO4

[hangs here.. waited several minutes]

dmesg with non-smp kernel:

Copyright (c) 2003, 2004 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
        The Regents of the University of California. All rights
reserved.
DragonFly 1.1-CURRENT #0: Sun Jul 25 17:48:51 EDT 2004
    me at xxxxxxxx:/usr/obj/usr/src/sys/GENERIC
TSC clock: 3395093928 Hz, i8254 clock: 1193495 Hz
CPU: Intel(R) Pentium(R) 4 CPU 3.40GHz (3394.22-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
 
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Hyperthreading: 2 logical CPUs
real memory  = 1072627712 (1047488K bytes)
avail memory = 1032458240 (1008260K bytes)
Preloaded elf kernel "/kernel.olde" at 0xc0623000.
Preloaded elf module "/modules/acpi.ko" at 0xc06231f0.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 13 entries at 0xc00fde60
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <IntelR AWRDACPI> on motherboard
installed MI handler for int 9
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib1: couldn't read bus number from cfg space
pcib1: trying bus number 1
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port
0xa000-0xa01f mem 0xfd000000-0xfd01ffff irq 10 at device 1.0 on pci1
em0: MAC address: 00:30:48:80:aa:d4
em0: Speed: N/A, Duplex:N/A
installed MI handler for int 10
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib2: <PCI to PCI bridge (vendor=8086 device=257b)> at device 3.0 on
pci0
pci2: <PCI bus> on pcib2
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port
0xa000-0xa01f mem 0xfd000000-0xfd01ffff irq 10 at device 1.0 on pci2
em1: Unable to allocate bus resource: memory
device_probe_and_attach: em1 attach returned 6
pcib3: <PCI to PCI bridge (vendor=8086 device=25ae)> at device 28.0
on pci0
pci3: <PCI bus> on pcib3
3ware device driver for 9000 series storage controllers, version:
2.40.00.000
twa0: <3ware 9000 series Storage Controller> port 0xb000-0xb0ff mem
0xf9000000-0xf97fffff,0xf9880000-0xf98800ff irq 9 at device 1.0 on
pci3
twa0: 4 ports, Firmware FE9X 2.02.00.008, BIOS BE9X 2.02.01.037
pci3: <unknown card> (vendor=0x11ab, dev=0x5041) at 4.0 irq 9
uhci0: <UHCI (generic) USB controller> port 0xd400-0xd41f irq 11 at
device 29.0 on pci0
installed MI handler for int 11
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xd000-0xd01f irq 5 at
device 29.1 on pci0
installed MI handler for int 5
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x8086, dev=0x25ab) at 29.4
pci0: <unknown card> (vendor=0x8086, dev=0x25ac) at 29.5
pci0: <USB controller> at 29.7 irq 9
pcib4: <Intel 82801BA/CA/DB/EB/FB (ICH2/3/4/5/6) Hub to PCI bridge>
at device 30.0 on pci0
pci4: <PCI bus> on pcib4
pci4: <ATI Mach64-GR graphics accelerator> at 9.0 irq 3
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port
0xc400-0xc43f mem 0xfc000000-0xfc01ffff irq 5 at device 10.0 on pci4
em1: MAC address: 00:30:48:80:aa:d5
em1: Speed: N/A, Duplex:N/A
isab0: <PCI to ISA bridge (vendor=8086 device=25a1)> at device 31.0
on pci0
isa0: <ISA bus> on isab0
atapci0: <Generic PCI ATA controller> port
0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
installed MI handler for int 14
ata1: at 0x170 irq 15 on atapci0
installed MI handler for int 15
pci0: <unknown card> (vendor=0x8086, dev=0x25a4) at 31.3 irq 3
orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
installed MI handler for int 6
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
installed MI handler for int 1
psm0: <PS/2 Mouse> irq 12 on atkbdc0
installed MI handler for int 12
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
installed MI handler for int 4
sio1: can't drain, serial port might not exist, disabling
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
installed MI handler for int 7
installed MI handler for int 0
acd0: CDROM <CD-224E> at ata1-master PIO4
Mounting root from ufs:/dev/da0s1a
da0 at twa0 bus 0 target 0 lun 0
da0: <3ware Logical Disk 00 1.00> Fixed Direct Access SCSI-0 device 
da0: 100.000MB/s transfers
da0: 152577MB (312477696 512 byte sectors: 255H 63S/T 19450C)
cd0 at ata1 bus 0 target 0 lun 0
cd0: <TEAC CD-224E 1.9A> Removable CD-ROM SCSI-0 device 
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not
present
WARNING: #da/0x20000 si_iosize_max=0, using DFLTPHYS.
WARNING: #da/0x20007 si_iosize_max=0, using DFLTPHYS.
WARNING: #da/0x20004 si_iosize_max=0, using DFLTPHYS.
WARNING: #da/0x20006 si_iosize_max=0, using DFLTPHYS.
WARNING: #da/0x20005 si_iosize_max=0, using DFLTPHYS.
em0: Link is up 100 Mbps Full Duplex

If there is anything I can do to help
please let me know.

tnx
-kim



		
__________________________________
Do you Yahoo!?
New and Improved Yahoo! Mail - Send 10MB messages!
http://promotions.yahoo.com/new_mail 





More information about the Bugs mailing list